NODKA Industrial Co.,Ltd
Shanghai Headquarters(International Sales)
Email Us Add to Favorite
Web Language: Simplified Chinese
   Industrial LCD Monitor
LCD Monitor w/Touch Panel
Video Wall
LCD Industrial Monitor
Open Frame Monitor w/touch Panel
Rugged/Panel Mount/Industrial Touch Monitors
Projected Capacitive Touch Panel Mount monitor
IP65 High bright lcd monitor
Outdoor Digital Signage
Indoor High Bright Display
Open Frame High Bright LCD
AR Bonding and ITO Coating Treatment
   Touch Panel
Projected Capacitive touch Panel
Resistive touch Panel
Surface acoustic wave(SAW)
Infrared touch screen
   LCD Kits
LCD Controller board
Inverter/LED driver board
T-CON board
LVDS cables
   Small size touch module
Resistive Type
Capacitive Type
TFT LCD Panel sourcing
  Conversion board
Conversion board
Item No.:  ND-UT-TCON-N1

Product acknowledgment

Scope This standard applies to industrial motherboard for LCD / TTL signal points: AT050TN22 V.1, AT056TN52 V.2, AT070TN92, AT080TN52, EJ080NA-05A/HSD070IDW1-D, A104SN01, LSA40AT9001 signal conversion and other small and medium size motherboard dot screen function.
Product Description TTL or LVDS signals selectable input

CON with backlight driver circuit board

can drive 640 * 480 800 * 480 800 * 600 variety of LCD modules

Work Environment

Working temperature: -10 ℃ ~ +70 ℃

Operating Humidity: 90% RH (non-condensation)

Save the environment Storage temperature : -20 ℃ ~ +80 ℃

Storage Humidity: 90% RH (non-condensation)

Product Specifications

Product shape structure (Unit: mm).Finished board (including component thickness 4.50mm).

Product Interface Definition

CON4 (TTL signal input) 40PIN / 0.5

Pin No.

Definitions

Description

Remark

1

GND-VCC

Ground and 5V selectable

Note1

2

GND-VCC

Ground and 5V selectable

Note2

3

ON / OFF

Backlight control signal

Note3

4

VCC-GND

LCD Selectable 3.3V power supply and ground

Note4

5

VCC-GND

LCD Selectable 3.3V power supply and ground

Note5

6

VCC

LCD Power 3.3V

7

VCC

LCD Power 3.3V

8

NC

No

9

DE

Enable signal

10

VS

Line synchronizing signal

11

HS

Field sync signal

12

GND

Ground

13

B5

Blue  signals

14

B4

Blue  signals

15

B3

Blue  signals

16

GND

Ground

17

B2

Blue  signals

18

B1

Blue  signals

19

B0

Blue  signals

20

GND

Ground

21

G5

Green  signals

22

G4

Green  signals

23

G3

Green  signals

24

GND

Ground

25

G2

Green  signals

26

G1

Green  signals

27

G0

Green  signals

28

GND

Ground

29

R5

Red  signals

30

R4

Red  signals

31

R3

Red  signals

32

GND

Ground

33

R2

Red  signals

34

R1

Red  signals

35

R0

Red  signals

36

GND

Ground

37

GND-DCLK

Ground and clock Optional

Note6

38

DCLK-GND

Clock and Ground Optional

Note7

39

GND

Ground

40

GND

Ground

Remarks Change Description

Note1

By R153R of 0R resistor can convert between 5V and ground is also available as an empty leg (on the solder R153 0R resistor from this pin to 5V, no welding is empty legs, R153 0R resistor across the upper end to the upper end of this pin is R151 ground) routine is empty legs

Note2

Ditto (1 foot 2 feet for conducting foot)

Note3

Routine is without control (to control the need to remove the resistor R106 R104 position plus 0R resistor high after the change is open)

Note4

0R resistor R152 is achieved by converting between 3.3V and ground pin can also be used as an empty upper (0R resistor R152 on the welding of this pin is 3.3V, the lower end of the 0R resistor R152 cross-resistance to a 0R resistor R151 this pin to ground) routine is empty legs

Remarks Change Description

Note5

Ibid (5 feet 6 feet conduction feet)

Note6

When welding 0R resistor R157 R156 37 feet of empty land. When welding 0R resistor R156 R157 37 feet of space-time clock

Note7

When welding 0R resistor R159 R158 38 feet of space-time clock. When welding 0R resistor R158 R159 38 feet of empty land

U14 (LED backlight power input) 5PIN / 1.25

Pin No.

Definitions

Description

Remark

1

GND

Backlight power ground

2

GND

Backlight power ground

3

ON / OFF

Backlight control signal (high level of back light)

Note3

4

VCC

Backlight power +5V

5

VCC

Backlight power +5V

J2 (LED backlight output) 2PIN

Pin No.

Symbol

Description

Remark

1

LED+

Backlight voltage positive

2

LED-

Backlight voltage negative

Download PDF Specification

Copyright 2004~2020 Shanghai Headquarters(International Sales) (www.nodkaindustrial.com)  All Rights Reserved. Supported by elut.cn
Address: 2/F A Area building No 1755 South Hong Mei RdMinhang District, Shanghai China   
Phone: +86-21-6494 2222   Fax: +86-21-6494 5555    Post Code:    E-mail: sales[AT]nodkaindustrial.com